Hilti
Refine Search
- Cordless angle grinder with brushless motor, used with 22 V battery for everyday cutting and grinding with discs up to 125 mm diameter
- Ergonomic design and safety features (disc brake, Active Torque Control and dead man’s switch)
- 30-40% higher performance and battery capacity
- Improved balance and low weight make the tool less tiring and more flexible and versatile to use
- Brushless motor for three times longer lifetime (no commutator damage and no carbon brushes to change)
- Abrasive cutting discs optimised for use with this tool
- Finishing
- Demolition
- Cutting and grinding steel and other metals
- Deburring and polishing metal
- Cutting and grinding mineral materials
RM1,290.00
RM2,580.00
- Compact and lightweight 22V battery with improved run time
- Cordless Power Care (CPC) technology intelligently monitors each battery cell for consistent, longer-lasting power output and a reliable charge status display
- Fully sealed electronics for increased protection against dust, humidity and water
- Rubberised, glass-fibre reinforced casing – up to four times more resistant to damage from dropping and twice as resistant to extreme temperatures than standard ABS plastic
- Casing designed to cool the battery to the ideal temperature for faster charging and reduce overload during application
- Compatible with the whole Hilti 22V cordless tool range
- Compatible with the whole Hilti 18V and 22V cordless tool range
- Compatible with all Hilti C4/36 Li-ion chargers
- Applications in extreme temperature conditions – from 60° C down to -20° C
- Applications in extreme temperature conditions – from 140° F down to -4° F
RM610.00
RM1,220.00
- 22V 5.2Ah Li-ion battery for extended running time
- High-capacity battery providing the highest work-per-charge rating in its category and thus the longest running time with all Hilti 22V tools
- The latest CPC technology allows higher charging accuracy for longer running time and intelligently monitors each cell for improved performance
- Fully sealed electronics for increased protection against dust, humidity and water
- The rubberized, glass-fiber reinforced casing is up to 4 times more robust and resistant to damage from dropping and twice as resistant to temperature than standard ABS plastic
- Rugged internal construction helps protect the battery cells and electronics for longer life
- Compatible with the entire Hilti 22 V cordless tool range
- Compatible with the entire Hilti 18 V and 22 V cordless tool range
- Compatible with all Hilti C4/36 Li-ion chargers
- Applications in extreme temperature conditions – from 60° C down to -20° C
- Applications in extreme temperature conditions – from 140° F down to -4° F
RM930.00
RM1,860.00
- Fast charger to quickly charge all Hilti Li-ion batteries thanks to the max output of 9A and 350W
- Designed to help protect batteries from low voltage and other adverse charging conditions
- Fully compatible with all Hilti 12V (with adapter), 14V, 22V and 36V Li-ion batteries
- Fully compatible with all Hilti 12V (with adapter), 14V, 22V and 36V Li-ion batteries
- Fast charging of all Hilti Li-ion batteries
- Charges all Hilti 12V (with adapter), 14V, 22V and 36V Li-ion batteries
RM530.00
RM1,060.00
- Cordless 22V circular saw operated by Li-ion battery featuring guide rail compatibility and metal chip collector for cold metal cutting
- More than 100 cuts in MQ41 channel possible with one battery charge
- Weight of less than 4 kg for best handling and ease of use
- Blade brake stops the blade in less than 0.5 sec for maximum safety and convenience
- Effective chip collector for a clean working environment
- LED lamp built into the front section of the blade guard for shadowless illumination of the cutting line
- Cutting channels and pipes on the jobsite quickly, with the highest possible accuracy
- Cutting openings in sheet metal in heating and air conditioning installation work
- Cutting sandwich panels, mesh and corrugated sheet metal
- Corrective cutting and trimming of sheet metal on the jobsite
- Cutting channels, pipes, conduits and profiles quickly and accurately
RM2,120.00
RM4,240.00
- Power-class cordless 22V hammer drill driver with Active Torque Control and electronic cluth for universal use on wood, metal, masonry and other materials
- Outstanding performance-to-size ratio
- Hilti's exclusive Active Torque Control provides additional protection from tool over-rotation when bits stick
- All metal gearbox, rubber bumpers and glass fibre reinforced housing ensure maximum robustness
- Brushless motor provides high torque and application speeds while efficiently using battery power
- Dual LED work lights in the tool foot illuminate your work area with minimal shadows
- Hammer drilling in diameters up to 1/2" in brick, masonry and aerated concrete
- Hammer drilling in diameters up to 14mm in brick, masonry, sand-lime block and aerated concrete
- Drilling with auger and spade bits up to 32 mm diameter in wood
- Cutting recesses and through0-holes with hole saws up to 5'' diameter
- Cutting recesses and through-holes with hole saws up to 125mm diameter
RM1,870.00
RM3,740.00
- High-efficiency brushless motor means the tool lasts longer and gets more work done per charge
- Three gears and electronic speed control for easy switching between different driving speeds
- Ergonomic grip and trigger for maximum comfort and convenience during long periods of use
- Robust 1/4" hexagonal click-in chuck
- Four bright LEDs around the chuck provide direct illumination of the work surface
- Driving self-drilling and self-tapping screws up to 4.8 mm diameter in steel
- Driving 6 mm diameter HUS screw anchors in masonry and concrete
- Driving Spax screws up to 8 mm diameter in wood
- Driving 8 mm and 10 mm HRD frame anchors in masonry and concrete
- Drilling in wood with WDB-S spade bits
RM1,240.00
RM2,480.00
- Extremely powerful rotary hammer, designed for serial anchor drilling
- Very convenient and lightweight for superior handling
- High runtime flexibility thanks to two compatible, fast-charging Hilti 36 V Li-ion batteries – 'standard' and 'industrial'
- Active Vibration Reduction (AVR) system designed to increase user comfort and productivity
- Virtually dustless drilling with the DRS-6-A dust removal system
- Drilling and hammer drilling in concrete and masonry
- Occasional drilling in wood and steel with optional quick-release chuck
- Screwdriving using the special bit holder with TE-C (SDS Plus) connection end
- Drilling in concrete in clean areas using the DRS-6-A (02) integrated dust removal system
- Light chiselling
RM3,926.00
RM7,852.00